Set for injectors M9R engine PICHLER
Item No: 60382095
For piezo and solenoid valve controlled Bosch injectors
Because of the patented construction, where force is distributed on six places on the cylinder head, is pulling with 20 tons pulling force made possible
Additionally are the injectors clamped multiple times. Through this multiple clamping is a safe pulling with 20 tons pulling force assured
-Including illustrated operating instructions.
Pulling force 20 tons
For removing frozen common rail injectors from the cylinder head using 20 tons hollow piston cylinder. In case the injector breaks off during pulling on the lower screw connection can the additional pull spindles be used to pull out the rest of the injector.
It is recommended that after successful removing the injector to recondition the injector shaft with our Cleaning Set 9038100.
Nissan: Primastar, Qashqai , X-Trail
Renault: Espace IV, Grand Scenic II, Grand Scenic III, Koleos, Laguna II, Laguna III, Latitude, Megane CC, Megane II, Megane III, Scenic II, Scenic III, Trafic II, Vel Satis
Nissan: NV400, Opel: Movano,
Renault: Master III
Mercedes C-class: C 180d / C 200d
Nissan: Qashqai, X-Trail
Renault: Espace V, Fluence, Grand Scenic III, Kadjar, Megane CC, Megane III, Mégane IV, Scénic III, Talisman II, Trafic, Trafic III
60382115 Injector Removal Upgrade Set from 60385095/60385105 to the M9R / M9T / R9M (20 tons) set
60382125 Injector Removal Upgrade Set from 60385345 to 60382095/60382105
60382120 Injector Removal Upgrade Set from 60385050 to 60382095
60385350 Injector Removal Upgrade Set from 60382095 to 60385340/60385345